Cribs Safety for Your Baby
For first time parents, one of the things of uttermost significance on the must-do list is to get a baby crib for the imminent addition to the family. With so many styles and features to make a choice from, it can be hard to make only 1 selection. One thing on which elders should never compromise is the crib’s safety.
All baby cribs manufactured must meet consumer products Safety Commission standards. It is mandatory, from the least expensive cribs to million dollar baby cribs to do so. Additionally, if the crib has a certification label from the Juvenile Products Manufacturers’ organisation, you can rest assured the crib maker took the additional step of adhering to voluntary safety standards set by the North American Society for Testing and Materials.
There are some security features on which elders should never compromise, especially when considering secondhand or hand-me-down cribs. This is because most crib-related wounds tend to occur with older cribs. One of the best techniques of determining if the crib is safe enough is to test if the crib has ever been recalled. If it has then your options are simple : lose it and look for another one! If it’s’s not on the recall list, then a further visual inspection is to set your mind at ease.
Any parent should look the space between the bars or slats on a crib. These vertical elements shouldn’t be more than 2 3/8′ apart. A space that exceeds the specified width means there’s a chance the baby can squeeze into the space and afterwards get stuck. If you don’t have a tape measure handy, you can always put up with a soda can. This is about the same width, and if it fits comfortably in between the slats, then the crib is a no-go.
In the same vein, all mattresses utilized in a crib should be a tight fit to avoid posing a risk to the child’s safety. A mattress is too small when there is a width that’s two fingers wide, or more, between the mattress and the wall of the crib. Fortunately , most mattresses are made to fit most standard-sized cribs. The mattress also should be firm to provide sufficient support for the baby.
All cribs, even million buck baby cribs, should have corner posts that are less than 0.06 inches high. Cribs are different from grownup beds in the sense that a baby faces a strangulation hazard from such posts that exceed this measurement. Clothing can get caught on a post and a baby is unlikely to be able to free himself. When assembling a crib, make sure that all screws are in place before they’re tightened. Similarly, the crib should not have splinters or cracks. Any paint used on the crib should be lead-free enamel paint that is appropriate for household use.
it may take a while to settle on the best crib for your baby, but doing the right thing takes time and should not be rushed.
You can have more info’s about million dollar baby cribs, at http://babyhelpsite.net/million-dollar-baby-cribs-convertible-cribs/, where you can read a lot of details on million dollar baby cribs
Tags: baby cribs million dollar, baby million dollar cribs, million dollar baby cribs